Home > PRODUCTS > Replacement Parts


Common replacement parts are available online. Please call 800-545-6953 for parts not shown on the following pages:

Sort By:
Page of 2
replacement cable and sensor for sid rotary Cable and Sensor Probe part no. RP-10203 for Sludge Interface Detector SID-10200 Coretaker replacement check valve ball and stem
Sensor Probe
Model SID-10203
Description
materialepoxy encapsulation
technologyIRED emitter/detector
sensor gap
0.780" (20mm)
lensespolycarbonate
range min
100-2000 mg/l (varies)
range max
100-10000 mg/l (varies)
height4.125" (105mm)
width3.0" (77mm)
depth1.0" (25.4mm)
circular envelope
3.25" (82.5mm)
weight12.3 oz (350g)
colorblack
cable moisture
IP68
cable temp tolerance
15�f to +140�f (-20�c to +60�c)
cable lengths20 to 50 ft (6.1M to 15.2M)
cable markings1 ft increment factory installed
cable grip
bladder type strain relief

Replacement check ball for regular CORETAKER® model B-10104 all lengths. Includes check ball, stainless steel fastener and O-ring. Does not fit CORETAKER® MAX models.

Simply remove existing fastener from check valve and slide check valve off of bottom clear tube. Remove existing O-ring and insert replacement O-ring into internal groove and check ball into valve. Slide valve back onto clear bottom tube and insert fastener.
Replacement check valve assembly coretaker bottom section CORETAKER top section replacement part
Replacement Check Valve for regular CORETAKER® model B-10104 all lengths. Includes valve, check ball, stainless steel fastener and O-ring. Does not fit CORETAKER® MAX models.

Simply remove existing fastener from check valve and slide check valve off of bottom clear tube. Insert O-ring into internal groove and check ball into valve. Slide replacement valve back onto clear bottom tube and insert fastener.